HD Switch HiTorque 210ftlb (OEM 175-200) BIGBearing Billet Pulley PTO Clutch 109-9276 fits Toro Z Master Exmark 109-2916 103-0690 w/Larger Replacable Bearing 5218-44 5218-80 5218-150 5218-205 Mower

HD Clutches are designed at HD Clutch and Assembled in North Carolina. Higher Torque: 210 ft-lbs (OEM is 175 to 200 ft-lbs). We add a few more windings to our coils to provide the maximum gripping strength to prevent damaging micro-slipping during tough cutting conditions. The HD Switch BIGBearing design addresses the #1 reason clutches fail with a larger tougher pulley bearing. Machined Billet Pulleys: It is easy to damage formed pulley and damage (even a small stone nick) damages the belt with every rotation. With our Billet Pulley design, we include a snap ring so the bearing is replaceable, making this clutch rebuildable. Clutches all run very hot; we use a composite material instead of plastic to allow the heat to dissipate much faster. This makes the HD Clutch run much cooler; extending the bearing and clutch life. HD Clutch wrote the Bearing specifications to include Premium C3 Rated Bearings and high temperature rated synthetic grease to combat heat. Less Heat = Extended Life.

• Fits: Warner 5218-205, 5218-201, 5218-80, 5218-80C, 5218-44, 1-653048, 103-0690, 105-3630, 109-2916, 109-9276, 1-653048, 1-653292, 103-0690, 105-3630, 109-2916, E653048, E653292
• Fits: Exmark LHP19KA465, LHP23KA465, LHP23KA505, LHP23KA565, LHP23KC523, LHP27KC505, LHP27KC523, LHP27KC565
• Fits: Z Master ZMaster Z-Master Z147, Z148, Z149, Z150, Z153, Z400, Z441, Z449, Z450, Z453
• High Torque Coil: This OEM Upgrade has 210ftlbs (OEM is 175 or 200). Higher Torque Means this Clutch holds Strong Even in the Toughest Cuts and Prevents Overheating caused by slippage.
• BIGBearing: The Pulley Bearing Takes a lot of abuse and is often the first thing to fail. We use a Larger Pulley Bearing for a much longer life. We also designed our Billet Pulley with a snapring making the bearing replaceable.